For Bills with a lot of amendments, the Amendment Manager may become long and difficult to use. You may wish to use the filter options to make it more manageable and useful to you. Here are two suggestions for how to filter your Amendment Manager:
Filtering by status
Each amendment has a status (eg, Draft, On Hold, Submitted). You may filter your Amendment Manager according to the status of each amendment. The steps below will show you how to filter to Draft status.
1. You will need to set the “status” and flag the amendments as follows:
Amendment type | Status | Flagged |
|---|---|---|
Government amendment | Draft | No |
Handout amendment | Draft | Yes |
Superseded or discarded amendment | On hold | No |
Go to the Amendment Manager tab
Click on a flag icon on the left-hand side of an amendment to flag it.
The selected amendment will be highlighted yellow in the list when the flag is on. To remove the flag, simply click on the flag icon again.
For more information see here.
2. Filter your amendments to show only those with “Draft” status.
Use the quick filter option at the top-right of the Amendments Manager tab
This means that:
your amendments manager is now more manageable,
superseded or discarded amendments will not appear on your list (and the “on hold” status means they cannot accidentally be lodged),
handout amendments will still be visible so you can keep track of your drafting (but flagging it prevents it from being accidentally lodged),
submitted amendments will not appear in your amendment manager.
If you wish to see all amendments, you will need to change the Quick Filter to show “All amendments”.