Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

To assist with managing large numbers of amendments, it is suggested that drafters do the following:

1. Set the “status” and flag the amendments as follows:

Amendment type

Status

Flagged

Government amendment

Draft

No

Handout amendment

Draft

Yes

Superseded or discarded amendment

On hold

No

 How to set amendment status to "On hold"

From the 'Amendment Manager' tab, select the draft amendments you want to put 'On hold'

Click on the 'Amendment Action' drop-down menu at the top-right of the screen and select Set 'Draft' to 'On hold'

Amendments will be updated to 'On hold'

 How to flag and unflag amendments

  1. Go to the Amendment Manager tab

  2. Click on a flag icon on the left-hand side of an amendment to flag it.

The selected amendment will be highlighted yellow in the list when the flag is on. To remove the flag, simply click on the flag icon again.

2. Filter your amendments to show only those with “Draft” status.

 How to quickly filter amendments to Draft only

Use the quick filter option at the top-right of the Amendments Manager tab

This means that:

  • your amendments manager is now more manageable,

  • superseded or discarded amendments will not appear on your list (and the “on hold” status means they cannot accidentally be lodged),

  • handout amendments will still be visible so you can keep track of your drafting (but flagging it prevents it from being accidentally lodged),

  • submitted amendments will not appear in your amendment manager.

If you wish to see all amendments, you will need to change the Quick Filter to show “All amendments”.

  • No labels