Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Introduction

The editor allows you to insert an image into your document.

How to insert an image

  1. Place your cursor in the provision that you would like to insert image after
  2. Select to insert an image by:
    1. Right-click menu in the Editor View “Insert image”
    2. From the upper tool bar, select Insert > Insert image
  3. The system will present a dialogue box
    1. To upload an image…
      1. Click on the Upload button
      2. Browse to the folder on your computer that the image is saved
      3. Click on the Open button
    2. To select an image that has already been uploaded…
      1. Click on the image in the ‘File’ list
  4. Add alternate text (text which describes the image to assist visually-impaired users)
  5. You can optionally add an image caption and adjust the image alignment
  6. Click Insert
  7. The system will insert the image on the line below the text in your provision

How to delete an image

  1. Click on the image in the Editor
  2. Select ‘img block’ from the breadcrumb and click ‘backspace’
  3. The image will be removed from the document without affecting the element it was inserted in

How to update image information

  1. Click on the edit button next to the image in the document
  2. Make changes to any of the fields in the “Manage Image Properties” dialogue box and click Update button
  3. The system will update the image in the document with the changes

How to create high resolution images from Word

  1. Create your form/notice/table in Word (making sure it doesn't get split over two pages)
  2. Save the word doc as a PDF
  3. Open the PDF in Acrobat Reader (not in your browser)
  4. In Acrobat, go to the Edit menu> preferences...> General
  5. Check the box "Use fixed resolution for Snapshot tool images" and enter 300 in the resolution box and click Ok
  6. Go to the Edit menu again and select "Take a Snapshot"
  7. Use the snapshot tool to draw a selection box around the form/notice/etc., staying as close to the edges of the form etc. as possible
  8. Open Paint application
  9. Paste in snapshot from clipboard
  10. Save as jpeg
  11. Use the normal Lawmaker insert image function to insert it into your document

Hints and tips

  • The system will calculate the size of the image based on its properties and will display the image at a relative size alongside the text in the Editor.   The PDF will show its true size based on the mm height and width assigned.
  • The system will warn you when the image quality is less than the recommended size of 300 dpi, required for print publishing
  • You can only adjust the height or the size as the system will maintain the image aspect ratio
  • The system will save the image files against the document version so that only users with permission to see the document will view the images
  • When you duplicate a document version which contains images, these image files will be mapped to the duplicated version
  • Images must currently be either Jpeg or Tiff format 
  • When you delete an image from the document, the image will not be removed from list of images available in the document version so can be reinserted if required
  • No labels